Company Video

Gas Turbine Filter Elements

Rotary Pleating Machine

• Maximum width of rollers 1000mm
• Pleat depth variable 25-48mm
• DC geared drive unit
• Filter paper roll mounting stand
• Adjustable height of gathering table
• Change in pleat depth by change of gear
• Digital pleat counter with marking device
• Control panel for above
• Digital temp. indicator & controller for heating
• MS fabricated structure

Hot Melt Applicator for Pleat Edge Sealing

• Maximum height of paper can be dispensed         600mm
• Facility to adjust the travel as per paper pack height
• FRL unit and flow control valves
• AC geared motor drive unit for the movement of platform
• Top pressing unit for pressing the pleats after sealing
• Digital tank temperature indicator & controller
• Electrically heated hose with temp. sensing & controlling unit
• Dispensing nozzle manually operated
• Three phase geared motor for the pump
• AC variable drive
• Maximum tank temperature (150- 200°C)
• Control panel for the above
• Linear guide for the smooth movement of nozzle
• Temp. controller for nozzle
• MS fabricated structure
• Control panel for the above
• Power 440 V, 3Ph. 50 Hz, 4.5kwatts

Adhesive Dispenser

• Max width of adhesive application 950mm
• Adhesive applicators pleat depth till 65mm
• SS fabricated fevicol storage tank with safety valves, relief valves, pressure regulators drain valves & adhesive filling funnel.
• Rubber coated rollers for uniform spread of fevicol
• Fevicol dispensing nozzle
• Tray for resting of paper pack
• Linear motion drive unit
• Limit switch to adjust the travel as per the height of the of paper pack

Hot Plate for Gas Turbine Filters

• Al. Heated surface 500 x 500mm x 2nos
• Heating of hot plate with UV cassette
• Facility for Top pressing Platform
• Pneumatic cylinders fot platform pressing
• Maximum Height of filter 950mm.
• Facility to adjust the height 200mm
• Maximum Outer diameter of cap 500mm
• Wattage of each Heater 1.5kw
• Total nos. of heater 8nos
• Alarm to indicate the completion of cycle
• Geared motor arrangement to lower or raise the top pressing platform
• Each hot plate fitted with digital temp. indicator and controller
• MS fabricated structure
• Independent control panel for both hot plates
• Control panel for the above

Expanded Metal Mesh Making Machine

• Max width of sheet 1000mm
• Max sheet thickness 18G
• Max strokes per min 90-120 stroke
• MS fabricated frame
• 1 set of dies
• Stroke counter to cut the mesh after predetermined stroke
• Lubrication oil pump to lubricate the slides, guides & bushes
• Adjustable lateral movement of slide
• Control panel for above
• 3 phase motor 440V AC motor Feeding rollers

Sheet Decoiler

• Minimum diameter of the core - 450mm
• Maximum core dia -550mm
• Maximum width of the coil-1220mm
• Maximum OD of the coil -1100mm
• Maximum weight of the coil -3ton
• MS fabricated structure
• Loop sensor for start & stop of motor
• Geared reduction drive unit
• VF drive fitted for motor RPM
• Control panel for above
• Power: 440v, 3Ph, 50 H, 1.5kwatts

Adhesive Edge Drying Machine

• Max width of drying platform 1000mm
• Pneumatically operated platform
• Platform electrically heated with digital temp indication & controlling devices
• Drying cycle controlled by timer
• Platform surface covered by Teflon cloth
• Auto lifting of the platform after completion of one roll
• Support platform for resting of pack
• Control panel for above

Spot Welding Machine

• This text be updated soon

GT Test Rig / Reverse Pulse Test Equipment

• MS Fabricated structure
• Facility to mount 6 filters
• Mounting plate can be changed as per different mounting of the filter elements
• Diaphragm solenoid valve connected to pulsing nozzles are mounted on air tank
• 18” suction inlet to the test rig
• Central processing unit can be noted the DOP and pressure count.