Company Video

HEPA Filters

HEPA Paper Pleating Machine

• Maximum width of rollers 700mm.
• Pleat depth as per your specifications
• Vertical sinking platform with variable drive unit.
• Paper roll mounting stand with brakes
• Facility for quick change of pleat depth
• Variable drive for paper pleating roll
• Pleat Counter
• Online separator insertion in the pack
• Facility for On-line paper edge slitting
• Motor for quick return of sinking platform.
• Control panel with easy approach to both the operators.
• Control Panel with Auto/Manual operation mode

Aluminum Foil Folding, Corrugation and Cutting Machine

• Corrugation depth of roller 3.5 - 4 mm.
• Maximum width of rollers 310mm
• DC gear drive unit
• On line cutting of separator as per length required.
• Pneumatically operated Cutter
• Facility for folding of edges
• Length of separator to be set by Digital counter fitted with encoder
• Speed 20 separators/min.
• Control panel for the above

Mini Paper Pleating Machine with Hot Melt Separation System

• Maximum width of media pleating 610mm.(24”)
• Marking rollers assembly. pleat depth. 20 to 65mm.
• Roll unwinding stand with paper tensioning device
• Pneumatically operated Paper roll loading arrangement
• Paper holding arrangement for end pasting.
• Pleat compactor with adjustable height
• Pleat counter with marking device
• Idle grooved rollers for on line drying of hot melt
• Auto stopping of machine at the end of roll.
• MS fabricated structure
• Online Paper slitting arrangement Quick change of pleat depth with change of gears
• Conveyor for moving the pack to next station

Pusher Bar Pleating Leating Machine

• Maximum width of media 610mm
• Pleat depth 50mm, 75mm, 100mm and 290mm.
• Pneumatic operation
• Facility to set the pleat depth from 25mm-265mm
• Facility to adjust vertical lift of plate
• Screw to adjust the pleat depth
• MS fabricated structure
• Control panel for the above
• Linear motion bearings and guides
• Media mounting stand

HEPA Test Rig

• Blower capacity 2000cfm & 200mm of WC
• SS fabricated duct
• Damper for opening and closing of air flow
• Flow adjustment though VF Drive
• Blower motor 5 HP, 2880 rpm, 60 hz, 3Ph.
• Inlet for DOP smoke particle or test aerosol
• Clean filter bank without filters
• Up stream and downstream sample to the Particle counter
• Tapping fitted with solenoid valve to select the upstream or downstream count
• Centralized control panel
• Tapping for the measurement of pressure drop across the test filter
• Digital display of pressure drop measurement across the filter
• Flow measuring device fitted at down stream
• Straight in line upstream and downstream
• Supporting structure for the above
• Duct fitted with Inspection window
• Filter clamping device
• Pneumatic clamping with pneumatic cylinder
• Filter resting platform
• Control Panel for the above
• Pneumatic cylinder& valves
• Power required: 220V ,3Ph, 60 Hz, 5000 watts

Pack Tightness Checking Table

• Facility to place the filter 610 x 610mm.
• Arm to adjust as per the width of filter
• 2 kg rated impact load to the filter
• Dial to measure the deflection due to impact
• Wooden block with neoprene rubber pad
• 2 kg dead mass to be placed on wooden block

DOP Smoke Generator

• Tank capacity 2ltrs
• Multi nozzle design 6 nozzles
• Controls for nozzles
• Compressed air filter regulator unit
• Easy to carry
• SS fabricated structure
• Sealed cover unit
• Pneumatically operated
• Facility to operate 1-6 nozzles

Mask Filter Test Equipment

• Tank capacity 2ltrs
• Multi nozzle design 6 nozzles
• Controls for nozzles
• Compressed air filter regulator unit
• Easy to carry
• SS fabricated structure
• Sealed cover unit
• Pneumatically operated
• Facility to operate 1-6 nozzles